Wall Barrier 10 ADH – self-adhesive acoustic board 10 mm, 200 kg/m³

246,00 zł

49,20 zł / m²

Produkt dostępny

Polish product
Manufactured in Poland

Ships Fast
Within 3–5 working days

Recycled
Rebond foam

Specyfikacja

  • Format: 1000 x 1000 mm
  • Grubość: 10 mm
  • Gęstość: 200 kg/m³
  • Powierzchnia w opakowaniu: 5 m²

You can hear conversations or your neighbour's TV through the wall, but a narrow room, recess, or built-in structure doesn't allow for many centimetres. Wall Barrier 10 ADH is a compact rebond foam panel with a factory-applied self-adhesive layer. It allows you to incorporate 10 mm of material into your planned structure where a thicker solution simply wouldn't fit.

This variant is for situations where minimal thickness and attachment to a properly prepared surface are most important. The Wall Barrier 10 ADH model has a density of 200 kg/m³ and a self-adhesive finish.

One panel measures 1 × 1 m and covers 1 m². Before installation, you need to check the type of substrate, how it is prepared, and the planned finishing of the entire surface.

What is Wall Barrier 10 ADH suitable for?
As a vibration damping layer for cladding - under plasterboard, on installation enclosures, inside furniture structures, on sheet metal. Anywhere where resonance and buzzing, or sound penetration through the wall, are an issue.

How to install Wall Barrier 10 ADH
The surface must be clean, dry, and degreased. Dry-fit the panel, as the tape is single-use; then remove the paper and press from the centre outwards. Lay subsequent panels flush against each other, and then add the built-in structure on top.

FAQ

Is recycled foam inferior to new foam?

Rebond foam has been used in carpet underlay and technical layers for decades. Its recycled origin does not diminish its value. Instead, it gives the material another use that is well suited to its properties.

Why does the material vary in colour and appearance?pytanie

Rebond foam is made from recovered foam production offcuts in different colours, so each batch may look slightly different.

Colour does not affect the material’s load-bearing performance, acoustic properties or behaviour. Sorting the offcuts by colour would increase the price without improving performance. Once installed, rebond foam remains concealed beneath the floor, behind plasterboard or above a suspended ceiling.

When choosing a product, focus on its intended application, thickness and density—not its colour pattern.

Will rebond foam become compacted over time?

Rebond foam is designed specifically for applications where the material needs to perform under sustained compression. Its high density and cohesive structure make it considerably more resistant to compaction than lightweight upholstery foams.

This is one reason why rebond foam has long been used as carpet underlay—a layer exposed to thousands of footsteps every day. When correctly specified, the underlay is designed to retain its function rather than collapse after only a few months beneath the floor.

Selecting the right product remains essential. Its thickness and density must be suited to the type of flooring, the construction and the expected loads.

Sound insulation and sound absorption - what is the difference?

If you can hear your neighbours, a television through the wall or footsteps from above, you need sound insulation. Its purpose is to reduce sound passing through a wall, floor or ceiling.

If, on the other hand, your voice reflects around the room, conversations are difficult to understand and the space sounds echoey, the problem is reverberation. In that case, you need materials that absorb sound within the room.

Lightweight pyramid-shaped acoustic foams can help reduce echo and reverberation, but they cannot replace insulation within a building element. Kokon Pro works inside the floor, wall or ceiling assembly, as part of the barrier separating one space from another.

What tools do I need to install Kokon Pro?

You do not need specialist machinery to cut Kokon Pro materials. Whether you are working with Floor, Wall Barrier, Wall Panel or Top, the basic tool kit includes:

  • a sharp utility knife with spare blades,
  • a tape measure,
  • a long ruler or straightedge,
  • a pencil,
  • a vacuum cleaner or broom for preparing the surface.

The remaining tools will depend on where the product is being installed.

When installing Floor, you will also need any tools specified by the manufacturer of the panels, carpet or other floor finish.

For Wall Barrier, you will need a spirit level and, depending on the adhesive selected, a trowel, spatula or adhesive applicator gun. Wall Barrier is bonded directly to the existing wall, so no tools are required to build an additional frame.

For Wall Panel and Top, you will need a standard drylining tool kit, including a drill driver, drill or rotary hammer, metal snips and a spirit level. When installing a suspended ceiling, a laser level, stable stepladder or small work platform will also be very useful.